مركز مساعدة Guarding Visionتعيين جودة الصورة للجهاز المضاف عن طريق IP/النطاق
تكوين إعدادات جودة الصورة للأجهزة المضافة عبر عنوان IP أو اسم النطاق
For devices added by IP/Domain, you can set the image quality for live view.
For details about adding device by IP/Domain, see Add a Device by IP/Domain.
Steps
-
Start live view of a device added by IP/Domain.
-
Tap
on the live view page to enter the quality switching panel.The icon may vary with the actual image quality.
-
Set the image quality as desired.
-
Clear: Tap Clear to set the image quality to Clear.
-
Fluent: Tap Fluent to set the image quality to Fluent.
-
Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.
-
- Changing the image quality may affect the live view and recording.
- In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
- The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
- The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.
Recommended Configuration
H.264 (Hardware Decoding)
| Resolution | 1-ch | 2-ch | 4-ch | Recommended Configuration |
|---|---|---|---|---|
| 1080P | √ | √ | √ | Frame rate: 25fps; Bit rate: 4Mbps |
| 720P | √ | √ | √ | Frame rate: 25fps; Bit rate: 2Mbps |
| 4CIF | √ | √ | √ | Frame rate: 25fps; Bit rate: 512Kbps |
H.264 (Software Decoding)
| Resolution | 1-ch | 2-ch | 4-ch | Recommended Configuration |
|---|---|---|---|---|
| 720P | √ | √ | - | Frame rate: 25fps; Bit rate: 2Mbps |
| 4CIF | √ | √ | √ | Frame rate: 25fps; Bit rate: 512Kbps |
H.264+ (Hardware Decoding)
| Resolution | 1-ch | 2-ch | 4-ch | Recommended Configuration |
|---|---|---|---|---|
| 1080P | √ | √ | √ | Frame rate: 25fps; Bit rate: 4Mbps |
| 720P | √ | √ | √ | Frame rate: 25fps; Bit rate: 2Mbps |
H.264+ (Software Decoding)
| Resolution | 1-ch | 2-ch | 4-ch | Recommended Configuration |
|---|---|---|---|---|
| 720P | √ | √ | - | Frame rate: 25fps; Bit rate: 2Mbps |
H.265 (Software Decoding)
Hardware decoding is not supported.
| Resolution | 1-ch | 2-ch | 4-ch | Recommended Configuration |
|---|---|---|---|---|
| 1080P | √ | - | - | Frame rate: 25fps; Bit rate: 2Mbps |
| 720P | √ | √ | - | Frame rate: 25fps; Bit rate: 1Mbps |
| 4CIF | √ | √ | √ | Frame rate: 25fps; Bit rate: 256Kbps |