LogoGuarding Vision Hjælpecenter
LogoGuarding Vision Hjælpecenter
Hjemmeside - Forside
iOS-mobilklient
Juridiske oplysningerSymbolkonventioner
Oversigt
Vælg region ved første kørsel
Gæstetilstand
Registrering
Enhedshåndtering
Favoritadministration
Del enhed
Video
Livevisning
Start og stop livevisningIndstil vindueopdelingDigital zoom
PTZ-kontrol
Start tovejslydOptagelse og optagIndstil billedkvalitet for enhed tilføjet via IP/domæneIndstil billedkvalitet for Guarding Vision-enhedLive Visning for Fisheye-kameraÅbn dør under livevisning
Afspilning
Adgangskontrol
Sikkerhedskontrol
Ansigtsdatastyring
Video Intercom
Notifikationer
Andre Funktioner
Systemindstillinger
Nulstil adgangskode
iOS-mobilklientVideoLivevisning

Indstil billedkvalitet for enhed tilføjet via IP/domæne

Konfigurer billedkvalitetsindstillinger for enheder tilføjet via IP-adresse eller domænenavn

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Optagelse og optag

Tag billeder og optag videomateriale under livevisning

Indstil billedkvalitet for Guarding Vision-enhed

Juster billedkvalitetsindstillinger for enheder forbundet via Guarding Vision-tjenesten

Indholdsfortegnelse

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)