LogoGuarding Vision Abikeskus
LogoGuarding Vision Abikeskus
Veebisait - Avaleht
iOSi mobiilirakendus
Õiguslik teaveSümbolite tähendused
Ülevaade
Vali piirkond esmakordsel käivitamisel
Külalisrežiim
Registreerimine
Seadmehaldus
Lemmikute haldamine
Jaga seadet
Video
Otsevaade
Alusta ja peata otsevaadeMäära akna jaotusDigitaalne suurendamine
PTZ juhtimine
Alusta kahepoolset heliPildistamine ja salvestamineMäära pildi kvaliteet IP/domeeni kaudu lisatud seadmeleMäära pildi kvaliteet Guarding Vision seadmeleOtsevaade Fisheye-kaameraleAva uks otsevaate ajal
Taasesitus
Juurdepääsu kontroll
Turvakontroll
Näoandmete haldamine
Videointerkom
Teavitused
Muud funktsioonid
Süsteemi eelistused
Parooli lähtestamine
iOSi mobiilirakendusVideoOtsevaade

Määra pildi kvaliteet IP/domeeni kaudu lisatud seadmele

Konfigureerige pildi kvaliteedi seaded IP-aadressi või domeeninime kaudu lisatud seadmetele

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Pildistamine ja salvestamine

Jäädvustage pilte ja salvestage videomaterjale otsevaate ajal

Määra pildi kvaliteet Guarding Vision seadmele

Reguleerige pildi kvaliteedi seadeid Guarding Vision teenuse kaudu ühendatud seadmetele

Sisukord

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)