Logoمرکز راهنمای Guarding Vision
Logoمرکز راهنمای Guarding Vision
وب‌سایت - صفحه اصلی
کلاینت موبایل iOS
اطلاعات حقوقیقراردادهای نمادها
مرور اجمالی
انتخاب منطقه در اولین اجرا
حالت مهمان
ثبت نام
مدیریت دستگاه
مدیریت علاقه‌مندی‌ها
اشتراک‌گذاری دستگاه
ویدیو
نمایش زنده
شروع و توقف نمایش زندهتنظیم تقسیم پنجرهزوم دیجیتال
کنترل PTZ
شروع صدای دو طرفهعکسبرداری و ضبطتنظیم کیفیت تصویر برای دستگاه اضافه شده با IP/دامنهتنظیم کیفیت تصویر برای دستگاه Guarding Visionنمایش زنده برای دوربین Fisheyeباز کردن درb در حین نمایش زنده
پخش
کنترل دسترسی
کنترل امنیتی
مدیریت داده‌های چهره
اینترکام تصویری
اعلان‌ها
توابع دیگر
تنظیمات سیستم
بازنشانی رمز عبور
کلاینت موبایل iOSویدیونمایش زنده

تنظیم کیفیت تصویر برای دستگاه اضافه شده با IP/دامنه

تنظیمات کیفیت تصویر را برای دستگاه‌های اضافه شده از طریق آدرس IP یا نام دامنه پیکربندی کنید

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

عکسبرداری و ضبط

در حین نمایش زنده تصاویر را ثبت و فیلم‌های ویدیویی را ضبط کنید

تنظیم کیفیت تصویر برای دستگاه Guarding Vision

تنظیمات کیفیت تصویر را برای دستگاه‌های متصل از طریق سرویس Guarding Vision تنظیم کنید

فهرست مطالب

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)