LogoGuarding Vision Centar za pomoć
LogoGuarding Vision Centar za pomoć
Web stranica - Početna stranica
Mobilni klijent za iOS
Pravne informacijeKonvencije simbola
Pregled
Odaberite regiju pri prvom pokretanju
Način posjetitelja
Registracija
Upravljanje uređajima
Upravljanje Favoritima
Dijeljenje Uređaja
Video
Pregled uživo
Pokretanje i zaustavljanje pregleda uživoPostavljanje podjele prozoraDigitalni zum
PTZ Kontrola
Pokretanje dvosmjernog zvukaSnimanje i zapisivanjePostavljanje kvalitete slike za uređaj dodan preko IP/domenePostavljanje kvalitete slike za Guarding Vision uređajLive Prikaz za Fisheye KameruOtvaranje vrata tijekom pregleda uživo
Reprodukcija
Kontrola pristupa
Kontrola sigurnosti
Upravljanje Podacima Lica
Video interfon
Obavijesti
Druge funkcije
Sistemske postavke
Resetiranje lozinke
Mobilni klijent za iOSVideoPregled uživo

Postavljanje kvalitete slike za uređaj dodan preko IP/domene

Konfigurirajte postavke kvalitete slike za uređaje dodane preko IP adrese ili naziva domene

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Snimanje i zapisivanje

Snimite slike i zapišite video snimke tijekom pregleda uživo

Postavljanje kvalitete slike za Guarding Vision uređaj

Prilagodite postavke kvalitete slike za uređaje spojene preko usluge Guarding Vision

Sadržaj

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)