LogoPusat Bantuan Guarding Vision
LogoPusat Bantuan Guarding Vision
Situs Web - Beranda
Klien Seluler iOS
Informasi HukumKonvensi Simbol
Ringkasan
Pilih Wilayah Saat Pertama Kali Menjalankan
Mode Tamu
Pendaftaran
Manajemen Perangkat
Manajemen Favorit
Berbagi Perangkat
Video
Tampilan Langsung
Memulai dan Menghentikan Tampilan LangsungAtur Pembagian JendelaZoom Digital
Kontrol PTZ
Memulai Audio Dua ArahMenangkap dan MerekamAtur Kualitas Gambar untuk Perangkat yang Ditambahkan melalui IP/DomainAtur Kualitas Gambar untuk Perangkat Guarding VisionTampilan Langsung untuk Kamera FisheyeBuka Pintu Selama Tampilan Langsung
Pemutaran
Kontrol Akses
Kontrol Keamanan
Pengelolaan Data Wajah
Interkom Video
Notifikasi
Fungsi Lainnya
Pengaturan Sistem
Atur Ulang Kata Sandi
Klien Seluler iOSVideoTampilan Langsung

Atur Kualitas Gambar untuk Perangkat yang Ditambahkan melalui IP/Domain

Konfigurasikan pengaturan kualitas gambar untuk perangkat yang ditambahkan melalui alamat IP atau nama domain

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Menangkap dan Merekam

Tangkap gambar dan rekam rekaman video selama tampilan langsung

Atur Kualitas Gambar untuk Perangkat Guarding Vision

Sesuaikan pengaturan kualitas gambar untuk perangkat yang terhubung melalui layanan Guarding Vision

Daftar Isi

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)