LogoGuarding Vision Hjelpsenter
LogoGuarding Vision Hjelpsenter
Nettside - Forside
iOS-mobilklient
Juridisk informasjonSymbolkonvensjoner
Oversikt
Velg region ved første kjøring
Gjestemodus
Registrering
Enhetsstyring
Favoritthåndtering
Del enhet
Video
Direktevisning
Start og stopp direktevisningAngi vindusdelingDigital zoom
PTZ-kontroll
Start toveislydTa bilder og spille innAngi bildekvalitet for enhet lagt til via IP/domeneAngi bildekvalitet for Guarding Vision-enhetLive Visning for Fisheye-kameraÅpne dør under direktevisning
Avspilling
Tilgangskontroll
Sikkerhetskontroll
Ansiktsdatahåndtering
Video Intercom
Varsler
Andre Funksjoner
Systempreferanser
Tilbakestill passord
iOS-mobilklientVideoDirektevisning

Angi bildekvalitet for enhet lagt til via IP/domene

Konfigurer bildekvalitetsinnstillinger for enheter lagt til via IP-adresse eller domenenavn

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Ta bilder og spille inn

Fang bilder og spill inn videoopptak under direktevisning

Angi bildekvalitet for Guarding Vision-enhet

Juster bildekvalitetsinnstillinger for enheter tilkoblet via Guarding Vision-tjenesten

Innholdsfortegnelse

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)