LogoGuarding Vision Helpcentrum
LogoGuarding Vision Helpcentrum
Website - Homepage
iOS-mobiele client
Juridische InformatieSymboolconventies
Overzicht
Selecteer regio bij eerste uitvoering
Bezoekersmodus
Registratie
Apparaatbeheer
Favorieten Beheer
Apparaat delen
Video
Live Weergave
Live Weergave Starten en StoppenVensterindeling instellenDigitale zoom
PTZ-besturing
Two-way audio startenVastleggen en opnemenBeeldkwaliteit Instellen voor Apparaat Toegevoegd via IP/DomeinBeeldkwaliteit Instellen voor Guarding Vision ApparaatLive Weergave voor Fisheye-cameraDeur Openen Tijdens Live Weergave
Afspelen
Toegangscontrole
Veiligheidscontrole
Gezichtsgegevensbeheer
Video-intercom
Melding
Overige Functies
Systeeminstellingen
Wachtwoord resetten
iOS-mobiele clientVideoLive Weergave

Beeldkwaliteit Instellen voor Apparaat Toegevoegd via IP/Domein

Configureer beeldkwaliteitsinstellingen voor apparaten toegevoegd via IP-adres of domeinnaam

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Vastleggen en opnemen

Leg foto's vast en neem videobeelden op tijdens live weergave

Beeldkwaliteit Instellen voor Guarding Vision Apparaat

Pas beeldkwaliteitsinstellingen aan voor apparaten verbonden via Guarding Vision service

Inhoudsopgave

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)