LogoCentrum pomoci Guarding Vision
LogoCentrum pomoci Guarding Vision
Domovská stránka
Mobilný klient pre iOS
Právne informácieKonvencie symbolov
Prehľad
Výber oblasti pri prvom spustení
Režim návštevníka
Registrácia
Správa zariadení
Správa Obľúbených
Zdieľanie zariadení
Video
Živé zobrazenie
Spustenie a zastavenie živého náhľaduNastavenie rozdelenia okienDigitálny zoom
Ovládanie PTZ
Spustenie obojsmerného zvukuSnímanie a nahrávanieNastavenie kvality obrazu pre zariadenie pridané cez IP/doménuNastavenie kvality obrazu pre Guarding Vision zariadenieŽivé Zobrazenie pre Fisheye KameruOtváranie dverí počas živého náhľadu
Prehrávanie
Kontrola prístupu
Ovládanie zabezpečenia
Správa Údajov o Tvárach
Videovrátnik
Oznámenia
Ďalšie funkcie
Nastavenia systému
Resetovanie hesla
Mobilný klient pre iOSVideoŽivé zobrazenie

Nastavenie kvality obrazu pre zariadenie pridané cez IP/doménu

Konfigurujte nastavenia kvality obrazu pre zariadenia pridané cez IP adresu alebo názov domény

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Snímanie a nahrávanie

Snímajte obrázky a nahrávajte videozáznamy počas živého náhľadu

Nastavenie kvality obrazu pre Guarding Vision zariadenie

Upravte nastavenia kvality obrazu pre zariadenia pripojené cez službu Guarding Vision

Obsah

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)