LogoCenter za pomoč Guarding Vision
LogoCenter za pomoč Guarding Vision
Spletna stran - Domača stran
Mobilni odjemalec iOS
Pravne informacijeKonvencije simbolov
Pregled
Izberite regijo pri prvem zagonu
Način obiskovalca
Registracija
Upravljanje naprav
Upravljanje Priljubljenih
Deljenje Naprave
Video
Prikaz v živo
Zagon in ustavitev predogleda v živoNastavitev razdelitve okenDigitalno povečanje
PTZ Nadzor
Zagon dvosmerne zvočne komunikacijeZajemanje in snemanjeNastavitev kakovosti slike za napravo dodano prek IP/domeneNastavitev kakovosti slike za Guarding Vision napravoŽivi Pogled za Fisheye KameroOdpiranje vrat med predogledom v živo
Predvajanje
Kontrola dostopa
Nadzor varnosti
Upravljanje s Podatki o Obrazih
Video domofon
Obvestila
Druge funkcije
Sistemske nastavitve
Ponastavitev gesla
Mobilni odjemalec iOSVideoPrikaz v živo

Nastavitev kakovosti slike za napravo dodano prek IP/domene

Konfigurirajte nastavitve kakovosti slike za naprave dodane prek IP naslova ali imena domene

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Zajemanje in snemanje

Zajemite slike in posnemite video posnetke med predogledom v živo

Nastavitev kakovosti slike za Guarding Vision napravo

Prilagodite nastavitve kakovosti slike za naprave, povezane prek storitve Guarding Vision

Kazalo

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)