LogoGuarding Vision Центар за помоћ
LogoGuarding Vision Центар за помоћ
Веб страница - Почетна страница
iOS мобилни клијент
Pravne informacijeKonvencije simbola
Преглед
Izaberite region pri prvom pokretanju
Režim posetilaca
Регистрација
Управљање уређајима
Upravljanje Omiljenim
Дељење Уређаја
Video
Приказ уживо
Pokretanje i zaustavljanje pregleda uživoPodešavanje podele prozoraDigitalni zum
PTZ Kontrola
Pokretanje dvosmjernog zvukaSnimanje i zapisivanjePodešavanje kvaliteta slike za uređaj dodat preko IP/domenaPodešavanje kvaliteta slike za Guarding Vision uređajLive Prikaz za Fisheye KameruOtvaranje vrata tokom pregleda uživo
Репродукција
Kontrola pristupa
Kontrola sigurnosti
Upravljanje Podacima Lica
Video interfon
Obaveštenja
Ostale funkcije
Системске поставке
Resetovanje lozinke
iOS мобилни клијентVideoПриказ уживо

Podešavanje kvaliteta slike za uređaj dodat preko IP/domena

Konfigurišite postavke kvaliteta slike za uređaje dodate preko IP adrese ili imena domena

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Snimanje i zapisivanje

Snimite slike i zapišite video snimke tokom pregleda uživo

Podešavanje kvaliteta slike za Guarding Vision uređaj

Prilagodite postavke kvaliteta slike za uređaje spojene preko usluge Guarding Vision

Садржај

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)