LogoGuarding Vision Hjälpcenter
LogoGuarding Vision Hjälpcenter
Webbplats - Startsida
iOS-mobilklient
Juridisk informationSymbolkonventioner
Översikt
Välj region vid första körningen
Gästläge
Registrering
Enhetshantering
Favorithantering
Dela enhet
Video
Livevisning
Starta och stoppa livevisningStäll in fönsterindelningDigital zoom
PTZ-kontroll
Starta tvåvägsljudTa bilder och spela inStäll in bildkvalitet för enhet tillagd via IP/domänStäll in bildkvalitet för Guarding Vision-enhetLive Vy för Fisheye-kameraÖppna dörr under livevisning
Uppspelning
Åtkomstkontroll
Säkerhetskontroll
Ansiktsdatahantering
Video Intercom
Aviseringar
Övriga Funktioner
Systeminställningar
Återställ lösenord
iOS-mobilklientVideoLivevisning

Ställ in bildkvalitet för enhet tillagd via IP/domän

Konfigurera bildkvalitetsinställningar för enheter som lagts till via IP-adress eller domännamn

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Ta bilder och spela in

Fånga bilder och spela in videoupptagningar under livevisning

Ställ in bildkvalitet för Guarding Vision-enhet

Justera bildkvalitetsinställningar för enheter anslutna via Guarding Vision-tjänsten

Innehållsförteckning

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)