LogoGuarding Vision Yardım Merkezi
LogoGuarding Vision Yardım Merkezi
Web Sitesi - Ana Sayfa
iOS Mobil İstemci
Yasal BilgilerSembol Kuralları
Özet
İlk Çalıştırmada Bölge Seçin
Ziyaretçi Modu
Kayıt
Cihaz Yönetimi
Favoriler Yönetimi
Cihaz Paylaşımı
Video
Canlı Görüntü
Canlı Görüntüyü Başlatma ve DurdurmaPencere Bölümlemesini AyarlamaDigital Zoom (Turkish)
PTZ Kontrolü
Two-Way Audio (Turkish)Capturing and Recording (Turkish)Image Quality IP/Domain (Turkish)Image Quality Guarding Vision (Turkish)Fisheye Kamera için Canlı GörüntüOpen Door (Turkish)
Oynatma
Giriş Kontrolü
Güvenlik Kontrol
Yüz Verisi Yönetimi
Görüntülü İnterkom
Bildirimler
Diğer İşlevler
Sistem Ayarları
Şifre Sıfırlama
iOS Mobil İstemciVideoCanlı Görüntü

Image Quality IP/Domain (Turkish)

Configure image quality settings

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Capturing and Recording (Turkish)

Capture pictures and record video

Image Quality Guarding Vision (Turkish)

Adjust image quality settings

İçindekiler

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)