LogoGuarding Vision Yordam markazi
LogoGuarding Vision Yordam markazi
Veb-sayt - Bosh sahifa
iOS mobil mijozi
Huquqiy ma'lumotBelgilar shartnomasi
Umumiy ko'rinish
Birinchi ishga tushirishda mintaqani tanlang
Mehmon rejimi
Ro'yxatdan o'tish
Qurilmalarni boshqarish
Sevimlilarni Boshqarish
Qurilmani ulashish
Video
Jonli ko'rsatish
Jonli ko'rsatishni boshlash va to'xtatishOyna bo'linishini sozlashDigital Zoom (Uzbek)
PTZ boshqaruvi
Two-Way Audio (Uzbek)Capturing and Recording (Uzbek)Image Quality IP/Domain (Uzbek)Image Quality Guarding Vision (Uzbek)Fisheye Kamera uchun Jonli Ko'rishOpen Door (Uzbek)
Ijro etish
Kirish nazorati
Xavfsizlik Nazorati
Yuz ma'lumotlarini boshqarish
Video domofon
Bildirishnomalar
Boshqa funktsiyalar
Tizim sozlamalari
Parolni tiklash
iOS mobil mijoziVideoJonli ko'rsatish

Image Quality IP/Domain (Uzbek)

Configure image quality settings

For devices added by IP/Domain, you can set the image quality for live view.

For details about adding device by IP/Domain, see Add a Device by IP/Domain.

Steps

  1. Start live view of a device added by IP/Domain.

  2. Tap quality icon on the live view page to enter the quality switching panel.

    The icon may vary with the actual image quality.

  3. Set the image quality as desired.

    • Clear: Tap Clear to set the image quality to Clear.

    • Fluent: Tap Fluent to set the image quality to Fluent.

    • Custom: Tap Custom to open the Custom Settings window, and then configure the parameters (Resolution, Frame Rate, and Bitrate) and tap Confirm to confirm the custom settings.

  • Changing the image quality may affect the live view and recording.
  • In the multi-window mode, you can only set the image quality to Fluent, or set the image quality to Custom with the sub stream.
  • The live view effect is related to the performance of your network and phone. If the live view is not fluent or the screen appears blurred, reduce the resolution, frame rate and bitrate of the camera in custom mode.
  • The following table shows the recommended frame rate and bitrate configuration for different resolution at H.264, H.264+ and H.265 video compression by using iPhone 5S.

Recommended Configuration

H.264 (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264 (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 512Kbps

H.264+ (Hardware Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
1080P√√√Frame rate: 25fps; Bit rate: 4Mbps
720P√√√Frame rate: 25fps; Bit rate: 2Mbps

H.264+ (Software Decoding)

Resolution1-ch2-ch4-chRecommended Configuration
720P√√-Frame rate: 25fps; Bit rate: 2Mbps

H.265 (Software Decoding)

Hardware decoding is not supported.

Resolution1-ch2-ch4-chRecommended Configuration
1080P√--Frame rate: 25fps; Bit rate: 2Mbps
720P√√-Frame rate: 25fps; Bit rate: 1Mbps
4CIF√√√Frame rate: 25fps; Bit rate: 256Kbps

Capturing and Recording (Uzbek)

Capture pictures and record video

Image Quality Guarding Vision (Uzbek)

Adjust image quality settings

Mundarija

Steps
Recommended Configuration
H.264 (Hardware Decoding)
H.264 (Software Decoding)
H.264+ (Hardware Decoding)
H.264+ (Software Decoding)
H.265 (Software Decoding)